- Personal Radiation Monitoring Service
- Equipment Calibration and Testing
- Radioanalytical Services
- Hire of Radiation Meters
- Ultraviolet Radiation (UVR) Services
- UV Data
- Buyer's Guide for Sun Protection
- Radiation Safety Advice and Risk Evaluation
- Australian Clinical Dosimetry Service
- National Diagnostic Reference Level Service
- Australian National Radiation Dose Register
- Radiotherapy Calibrations
For more information please get in touch with ARPANSA
- Phone Number+61 3 9433 2211
- Fax Number+61 3 9432 1835
- email ARPANSA
Shadecloth is a popular way of providing shade for people outdoors
Shadecloth was originally designed to provide climate control in greenhouses and plant nurseries. Nowadays it's widely used for personal protection from the sun and is available in a variety of materials, colours and shade ratings so you can choose an appropriate product for your shade situation.
Shade is one of the most comfortable forms of personal protection from ultraviolet radiation (UVR). When used effectively most forms of shade can reduce UVR exposure by up to 75%, especially if used with other sun protection measures.
Important factors relating to UVR exposure when using shade structures are:
- the ability of the shade material to block UVR
- the positioning of the shade structure in relation to the sun and the people it is protecting
- the angle of the sun in the sky.
There are many resources available online to assist with designing comfortable and effective shade structures for private and public use such as these examples from SunSmart and Sun Safety Queensland.
Important considerations about shade protection
As well as UV radiation that reaches us directly from the sun, we can receive UVR exposure from what is known as indirect UV radiation (also known as diffuse or scattered radiation). Indirect UVR occurs when solar radiation is reflected to the ground from particles in the atmosphere, or reflected off nearby surfaces such as buildings, snow or water. This means that we can still receive some UVR exposure even when we are shaded and can't see the sun directly.
Indirect radiation can reach the ground from low angles so when designing shade structures we need to consider that radiation may be able to enter the shade structure from the sides. In the laboratory, shadecloth is tested in close proximity to the detector of the measuring equipment and these measurements will show how effective the material is against direct UVR but cannot account for the additional effects of indirect radiation which will vary depending on the factors listed above.
Shadecloth testing at ARPANSA
ARPANSA operates a service for measuring the UVR and visible transmission of shadecloth. The testing is performed in accordance with the UV-visible transmission requirements of Australian/New Zealand standard AS/NZS4174:1994, Synthetic shadecloth. Copies of this standard are available from Standards Australia.
Note that samples sent to ARPANSA cannot be returned as the testing procedure requires the samples to be cut into smaller pieces. Allow up to ten working days for the testing of the materials.
A shadecloth testing request form and a charge schedule are available from the ARPANSA UPF Testing Service on +61 3 9433 2309 or can be downloaded below:
- Shadecloth Testing Request Form - PDF 150 kb || DOC 725 kb
- Schedule of Charges for Shadecloth Testing - PDF 111 kb || DOC 49 kb
- Sample Shadecloth Test Report - PDF 65 kb
(see a full textual description of the Shadecoth Test Report)
- Methods of payment - see Payment Methods
Send samples be tested to and the sample request form to:
UPF Testing Service
619 Lower Plenty Road
Yallambie VIC 3085
Adobe Acrobat Reader is needed to view PDF files
The free Adobe Acrobat Reader is available from Adobe's website